Pro Tips for an Easier Installation of a Better Cable Catenary System

The use of suspension systems is extremely useful when it comes to both residential and commercial settings such as the electrical industry, construction industry, and much more.

If you’re planning on fixing a cable catenary system, there’s the average way, and there’s the better way. In this read, we’re going to tell you some of the pro tips for a better cable catenary system with the easiest installation.

Try to Go for Horizontal Fixation

Usually, horizontal tension always works better than vertical tension. But the problem occurs when the placement of the mounting plate ends up being at an angle. The more the inclination there is, the lesser would be the threshold tension, because just when the mounting plate starts being inclined, a portion of the tensile force will be removed as a vertical component.

Have the Ideal Fastening Mechanical Devices with You

Once the tension starts coming to the ideal stance, it’s necessary for the mounting plate to be well fixed on to the surface. Although you can always use a screwdriver, it’s not going to be as fastening better as an automated device. Hence, investing in one, or even hiring one would ensure that the mounting plate doesn’t come off no matter what.

Know the Proper Stance of the Buckle During Connection

Following the fixation of the mounting plate, you need to pay attention to the catenary wire buckle. Although most people would simply attach it to the system just as how they come by design, leaving two-thirds of space inside the screws is the best recommendation. This promotes a better initial locking with the system and gives more than enough space to fasten the system as a whole.

But you should ensure to have the right span of a buckle to make sure that there’s enough space for you to move the screws inside the buckle. If you’re buying them online, it would be much easier to know the dimensions because that’s the standard procedure.

Always Mark the Wire on Locations Where Clamps Will Be Fitted

Assuming you have the right type of clamps and the wire, it’s now time to prepare for the clamp fixation. When a wire is being considered, there’s always a specific diameter that is specially made for catenary systems. Once the wire is extended, what you need to do is mark the 6 times of the wire diameter apart from each other from a corner. When the clamps are being fixed, be sure to fasten them starting from the farthest clamp to inwards.

Avoid Thimble Deformation

Before finishing the system, the thimble needs to be attached to the wall mounting plate. To do that, it’s better to use a spanner so that you can adjust it just right so that the thimble doesn’t slip away, or deform.

Final Takeaways

There we go! Although you could have just installed any ordinarily average catenary system, now you have installed a better one in a much easier way. As a rule of thumb, be sure to use the best quality equipment for the longest duration in the threshold instance.